TeeJet Matrix Pro 840GS - Manual (Page 14)

8
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
CHAPTER 3 – JObs / HOME sCREEN
Once the power up sequence has completed, the Home screen will appear with the option to start a new job or continue an existing job.
The console must have GPS before starting or continuing a job.
Setup for the specific machine and its components must be completed before starting a job. Once a job is
active, some setup options are not available to be changed. See the Unit Setup Mode Menu Structure chart in the introduction chapter for
details.
To change between simple mode and advanced mode, see the configuration chapter under Data Management –> Options.
Simple Mode
In simple mode, only one job will be available at a time. Only bounded
area, coverage areas and application time are displayed on the home
screen. Only the current job is available for saving in Reports. Use
with Fieldware Link is not available.
Figure 3-1: Simple Mode Home Screen
Advanced Mode
In advanced mode, more than one job will be available at any time.
Client, farm, field and job names; bounded and coverage areas;
application time; and distance from selected job are displayed on the
home screen. Of the names, only the job name can be entered using
the console. All saved jobs can be made into a PDF, SHP or KML file
in Data->Reports. With Fieldware Link, a user can input client, farm
and field data as well as duplicate/edit jobs for reuse of boundaries
and guidelines. Client, Farm and Field information can only be inputted
using Fieldware Link.
Figure 3-2: Advanced Mode Home Screen