TeeJet Matrix Pro 840GS - Manual (Page 2)

GettinG Started
#1 Turn Power On
Press the POWER button to power on the console.
#2 Home screen
Once the power up sequence has completed, the Home screen will appear with
the option to start a new job or continue an existing job.
#3 Go To Unit setup
1. Press UNIT SETUP bottom tab .
The Configuration options will be displayed first. Data Management ,
Console Setting and Tools can be accessed through the side tab keys.
Cultural Setup
2. Press CONSOLE side tab .
3. Press
Cultural
.
Culture is used to configure Units, Language and Time Zone settings.
GPS Setup
1. Press CONFIGURATION side tab .
2. Press
GPS
.
GPS is used to configure GPS Type, GPS Port and PRN as well as to
view GPS status information.
Implement Setup
1. Press CONFIGURATION side tab .
2. Press
Implement
.
Implement Setup is used to establish the various settings associated
with straight mode, spreader mode or staggered mode. Settings will
vary depending on if a SmartCable or Section Driver Module (SDM) is
present.
AutoSteer Setup
1. Press CONFIGURATION side tab .
2. Press AutoSteer .
When a Steering Control Module (SCM) is present, Assisted/Auto
Steering options will be available. For detailed setup instructions, refer
to your specific assisted/auto steering installation manual.
#4 Go To Guidance screen
1. Press VEHICLE VIEW GUIDANCE tab , FIELD VIEW
GUIDANCE tab or REALVIEW GUIDANCE tab .
2. Press NAVIGATION AND GUIDANCE OPTIONS tab to display
navigation options.
Choose a Guidance Mode
►Straight AB
►Curved AB
►Circle Pivot ►Last Pass
►NextRow
Mark A and B Points A B
To establish a AB guideline.
#3
#2
10.0
mph
27.00
ac
> 0.0 <
A
A A
#4