TeeJet Matrix Pro 840GS - Manual (Page 28)

22
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
Reports
Reports is used to create job reports and save them to a USB drive.
NOTE: If Simple Job Mode is selected in the Options page, only the
current job can be saved.
When a job is active/started, Reports are not available for
selection. Stop the current job to enable the function.
When closing a job with a USB drive in the console, you get
the option to create a report on the current job.
1. Press DATA MANAGEMENT side tab .
2. Press
Reports
.
3. Insert USB drive into the console.
4. Select the job to be saved
5. Select:
►PDF
PDF
– report for print
►KML
KML
– Google Earth Map
►SHP
SHP
– ESRI shape data
►ALL
PDF
– all available file types
6. Press RETURN arrow or DATA MANAGEMENT side
tab to return to the main Data Management screen.
NOTE: The file icons ALL PDF KML SHP or buttons are not available for
selection (grayed out) until a USB drive is inserted properly.
Figure 5-28: Reports - Advanced Job Mode
Figure 5-29: Reports - Simple Job Mode
Options
Options allows the operator to select between Simple or Advanced
Job Mode.
NOTE: When a job is active/started, changing the Job Mode is not
available. Stop the current job to enable the function.
WARNING! Changing job modes deletes all internal job data.
1. Press DATA MANAGEMENT side tab
.
2. Press Options .
3. Press DOWN arrow to access the list of options.
4. Select:
►Simple – only bounded area and coverage areas are
displayed on the home screen. Only the current job is
available for saving in Reports. Use with Fieldware Link is
not available.
►Advanced – Client, farm, field and job names; bounded and
coverage areas; and distance from selected job are displayed
on the home screen. Of the names, only the job name can
be entered using the console. All saved jobs can be made
into a PDF, SHP or KML file in Data->Reports. With Fieldware
Link, a user can input client, farm and field data as well as
duplicate/edit jobs for reuse of boundaries and guidelines.
Client, Farm and Field information can only be inputted using
Fieldware Link.