TeeJet Matrix Pro 840GS - Manual (Page 15)

9
98-05273-ENUS R4
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
SiMPle MOde
Once the power up sequence has completed, the Home screen will
appear with the option to start a new job or continue an existing job.
The console must have GPS before starting or continuing a job.
New Job
Starting a new job will clear the previous job data.
To start a New Job:
1. On the Home screen , press
New Job
.
The console will jump to Vehicle View.
Continue Job
The Continue button is not available when the current job is more
than two (2) UTM Zones away.
To continue the existing job:
1. On the Home screen , press Continue .
The console will jump to Vehicle View and begin providing navigation
information.
Close Job
To close a job:
1. On the Home screen , press
Close Job
.
To create a report of the job when closing a job:
1. Insert a USB drive into the USB port of the console.
2. On the Home screen , press
Close Job
.
3. Select:
►Yes – to create a report of the last job
►No – to return to the Home screen without saving
adVanCed MOde
Once the power up sequence has completed, the Home screen will
appear with the option to start a new job or continue an existing job.
The console must have GPS before starting or continuing a job.
New Job
Starting a new job will clear the previous job data.
To start a New Job:
1. On the Home screen , press
New Job
.
2. Press:
►Yes – to automatically generate a name
►No – to enter a name using the on screen keyboard
Client, farm and field information are inputted using Fieldware Link.
The console will jump to Vehicle View.
start Job
The Matrix Pro is programd with a field finder tool to assist the
user in finding the job closest to the vehicle’s location. With GPS
acquired, the job pick list will be updated every ten seconds. During
this update, the list of jobs is sorted by distance and the closest two
jobs are displayed on the top of the list. The remaining jobs are listed
beneath these.
The Start Job button is not available and the Distance will show “Out
of Range” when the current job is more than two (2) UTM Zones
away. The Distance will show “No Data” when the current job has no
recorded information.
To continue the existing job:
1. On the Home screen , press DOWN arrow to access the
list of jobs saved in the console.
2. Select the job name to be started/continued.
3. Press
Start Job
.
The console will jump to Vehicle View and begin providing navigation
information.
Close Job
To close a job:
1. On the Home screen , press
Close Job
.
To create a report of the job when closing a job:
1. Insert a USB drive into the USB port of the console.
2. On the Home screen , press
Close Job
.
3. Select:
►Yes – to create a report of the last job
►No – to return to the Home screen without saving