Interlogix GE-DSH-73 Series User Manual - Manual (Page 85)

Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 81
Figure 5-31: VLAN - Port Based interface
• Pull down the selection item and focus on Port Based then press to set the VLAN
Operation Mode in Port Based mode.
Click ADD to add a new VLAN group (The maximum VLAN groups are up to 64).
Figure 5-32: VLAN - Port Based Add interface
• Enter the group name and VLAN ID. Add the selected port number into the right
field to group these members to be a VLAN group, or remove any of them listed in
the right field from the VLAN.
• And then, click APPLY to have the configuration take effect.
• You will see the VLAN list displays.