Interlogix GE-DSH-73 Series User Manual - Manual (Page 160)

Chapter 6: Command Sets
156 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
TFTP Commands Set
Commands Level Description Defaults Example
backup flash:backup_cfg G Save configuration to TFTP and
need to specify the IP of TFTP
server and the file name of
image. switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from TFTP
server and need to specify the
IP of TFTP server and the file
name of image. switch(config)#restore
flash:restore_cfg
upgrade flash:upgrade_fw G Upgrade firmware by TFTP and
need to specify the IP of TFTP
server and the file name of
image. switch(config)#upgrade
flash:upgrade_fw