Interlogix GE-DSH-73 Series User Manual - Manual (Page 54)

Chapter 5: Web-Based Management
50 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
This page includes the following fields:
Object Description
DHCP Server:
Enable or Disable the DHCP Server function. Enable—the switch will be
the DHCP server on your local network.
Low IP Address:
Type in an IP address. Low IP address is the beginning of the dynamic
IP range. For example, dynamic IP is in the range between
192.168.0.101 ~ 192.168.0.200. In contrast,
192.168.0.101 is the Low IP
address.
High IP Address:
Type in an IP address. High IP address is the end of the dynamic IP
range. For example, dynamic IP is in the range between 192.168.0.101
~ 192.168.0.200. In contrast,
192.168.0.200 is the High IP address.
Subnet Mask: Type in the subnet mask of the IP configuration.
Gateway: Type in the IP address of the gateway in your network.
DNS: Type in the Domain Name Server IP Address in your network.
Lease Time (sec):
It is the time period that system will reset the dynamic IP assignment to
ensure the dynamic IP will not been occupied for a long time or the
server doesn’t know that the dynamic IP is idle.
Client Entries
When the DHCP server function is enabled, the system will collect the DHCP client
information including the assigned IP address, the MAC address of the client device,
the IP assigning type, status and lease time.
Figure 5-6: DHCP Client Entries interface