Interlogix GE-DSH-73 Series User Manual - Manual (Page 158)

Chapter 6: Command Sets
154 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
802.1x Commands Set
Commands Level Description Example
8021x enable G Use the 802.1x global
configuration command to
enable 802.1x protocols. switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x system
radius IP global
configuration command to
change the radius server IP. switch(config)# 8021x system radiusip
192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x system
server port global
configuration command to
change the radius server
port switch(config)# 8021x system
serverport 1812
8021x system
accountport
[port ID]
G Use the 802.1x system
account port global
configuration command to
change the accounting port switch(config)# 8021x system
accountport 1813
8021x system sharedkey
[ID]
G Use the 802.1x system share
key global configuration
command to change the
shared key value. switch(config)# 8021x system
sharedkey 123456
8021x system nasid
[words]
G Use the 802.1x system nasid
global configuration
command to change the
NAS ID switch(config)# 8021x system nasid
test1
8021x misc quietperiod
[sec.]
G Use the 802.1x misc quiet
period global configuration
command to specify the
quiet period value of the
switch. switch(config)# 8021x misc
quietperiod 10
8021x misc txperiod
[sec.]
G Use the 802.1x misc TX
period global configuration
command to set the TX
period. switch(config)# 8021x misc txperiod 5
8021x misc supptimeout
[sec.]
G Use the 802.1x misc supp
timeout global configuration
command to set the
supplicant timeout. switch(config)# 8021x misc
supptimeout 20