Interlogix GE-DSH-73 Series User Manual - Manual (Page 63)

Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 59
Fault Relay Alarm
The Fault Relay Alarm function provides the Power Failure and Port Link Down/Broken
detection. With both power input 1 and power input 2 installed and the check boxes
of power 1/power 2 ticked, the FAULT LED indicator will then be possible to light up
when any one of the power failures occurs. As for the Port Link Down/Broken
detection, the FAULT LED indicator will light up when the port failure occurs; certainly
the check box beside the port must be ticked first. Please refer to the segment of
'Wiring the Fault Alarm Contact' for the failure detection.
Figure 5-14: Fault Relay Alarm interface
This page includes the following fields:
Object Description
Power Failure:
Tick the check box to enable the function of lighting up the FAULT
LED on the panel when power fails.
Port Link Down/Broken:
Tick the check box to enable the function of lighting up FAULT LED
on the panel when Ports’ states are link down or broken.