Interlogix GE-DSH-73 Series User Manual - Manual (Page 74)

Chapter 5: Web-Based Management
70 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Object Description
Work ports:
This column field allows the user to type in the total number of active port
up to four. With LACP static trunk group, e.g. you assign four ports to be
the members of a trunk group whose work ports column field is set as
two; the exceed ports are standby/redundant ports and can be
aggregated if working ports fail. If it is a static trunk group (non-LACP), the
number of work ports must equal the total number of group member
ports.
Aggregator Information
When you have setup the LACP aggregator, you will see relavent information in here.
• LACP disabled
Having set up the aggregator setting with LACP disabled, you will see the local static
trunk group information on the tab of Aggregator Information.
Figure 5-21: Assigning 2 ports to a trunk group with LACP disabled