Interlogix GE-DSH-73 Series User Manual - Manual (Page 154)

Chapter 6: Command Sets
150 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
SNMP Commands Set
Commands Level Description Example
snmp system-name
[System Name]
G Set SNMP agent system
name switch(config)#snmp system-name
l2switch
snmp system-location
[System Location]
G Set SNMP agent system
location switch(config)#snmp system-location
lab
snmp system-contact
[System Contact]
G Set SNMP agent system
contact switch(config)#snmp system-contact
where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode of
SNMP switch(config)#snmp agent-mode
v1v2cv3
snmp community-
strings
[Community]
right
[RO/RW]
G Add SNMP community string. switch(config)#snmp community-
strings public right rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
[v1|v2c]
G Configure SNMP server host
information and community
string switch(config)#snmp-server host
192.168.1.50 community public trap-
version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G Configure the context name switch(config)#snmpv3 context-name
Test
snmpv3 user
[User Name]
group
[Group Name]
password
[Authentication
Password] [Privacy
Password]
G Configure the userprofile for
SNMPV3 agent. Privacy
password could be empty. switch(config)#snmpv3 user test01
group G1 password AuthPW PrivPW