Interlogix GE-DSH-73 Series User Manual - Manual (Page 8)

Chapter 1: Introduction
4 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
1 RJ-45 Console interface for Switch basic management and setup
o
GE-DSH-82-PoE (Power Over Ethernet)
2-Port 10/100/1000Base-T TP combo interfaces
2 mini-GBIC / SFP slots shared with Gigabit copper ports and support
100/1000 Dual Mode
1 RJ-45 Console interface for Switch basic management and setupGE-
DSH-73
Supports 48VDC, 15.4 watts PoE power outputs to 9 IEEE 802.3af
compliant Powered Devices
Power feeding On/Off and priority configuration
Powered Device Auto detection
LED PoE Status Monitoring
Note: The GE-DSH-82-PoE, PoE requires the use of the recommended external power
source.
o
GE-DSH-73
7-Port 10/100Base-TX RJ-45
3-Port 10/100/1000Base-T TP combo interfaces
3 mini-GBIC / SFP slots shared with Gigabit copper ports and support
100/1000 Dual Mode
1 RJ-45 Console interface for Switch basic management and setup
Industrial Conformance
• Wide range redundant power with polarity reverse protect function
• -40 to 75 Degree C operation temperature
• IP-30 metal case
• Relay alarm for port breakdown, power failure
• Supports 4000 VDC Ethernet ESD protection
• Free fall, Shock and Vibration Stability
Rapid Ring
• Rapid Ring, Dual Homing, Couple Ring Topology
• Provides redundant backup feature and the recovery time less than
20ms