Interlogix GE-DSH-73 Series User Manual - Manual (Page 75)

Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 71
Figure 5-22: Static Trunking Group information
This page includes the following fields:
Object Description
Group Key: This is a read-only column field that displays the trunk group ID.
Port Member:
This is a read-only column field that displays the members of this
static trunk group.
• LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the trunking
group information between two switches on the tab of Aggregator Information.
o
Switch 1 configuration
1. Set System Priority of the trunk group. The default is 1.
2. Select a trunk group ID by pull down the drop-down menu bar.
3. Enable LACP.
4. Include the member ports by clicking the Add button after selecting the port
number and the column field of Work Ports changes automatically.