Interlogix GE-DSH-73 Series User Manual - Manual (Page 106)

Chapter 5: Web-Based Management
102 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
• Context Table
Configure SNMP v3 context table. Assign the context name of context table. Click ADD
to add context name. Click REMOVE to remove unwanted context name.
• User Table
Configure SNMP v3 user table.
This page includes the following fields:
Object Description
User ID: Set up the user name.
Authentication
Password:
Set up the authentication password.
Privacy Password: Set up the private password.
• Group Table
Configure SNMP v3 group table.
Figure 5-46: SNMP V3 configuration interface - Group Table