Port-based priority, Cos configuration – Interlogix GE-DSH-73 Series User Manual User Manual
Page 111
Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
107
Port-based Priority
Configure the priority level for each port. With the drop-down selection item of
Priority Type above being selected as Port-based, this control item will then be
available to set the queuing policy for each port.
Figure 5-50: QoS Configuration - Port-Based Priority
This page includes the following fields:
Object
Description
Port x:
Each port has 4 priority levels—High, Middle, Low, and Lowest—to
be chosen.
COS Configuration
QoS settings allow customization of packet priority in order to facilitate delivery of
data traffic that might be affected by latency problems. When CoS / 802.1p Tag
Priority is applied, the Switch recognizes 802.1Q VLAN tag packets and extracts the
VLAN tagged packets with User Priority value.