Interlogix GE-DSH-73 Series User Manual - Manual (Page 142)

Chapter 6: Command Sets
138 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
reload G Halt and perform a cold
restart switch(config)#reload
default G Restore to default switch(config)#default
admin username
[Username]
G Changes a login username.
(maximum 10 words) switch(config)#admin username
xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words) switch(config)#admin password
xxxxxx
show admin P Show administrator
information
switch#show admin
dhcpserver enable G Enable DHCP Server switch(config)#dhcpserver enable
Dhcpserver disable G Disable DHCP Server switch(config)#no dhcpserver
dhcpserver lowip [Low
IP]
G Configure low IP address for
IP pool switch(config)#dhcpserver lowip
192.168.1.100
dhcpserver highip [High
IP]
G Configure high IP address for
IP pool switch(config)#dhcpserver highip
192.168.1.200
dhcpserver subnetmask
[Subnet mask]
G Configure subnet mask for
DHCP clients switch(config)#dhcpserver
subnetmask 255.255.255.0
dhcpserver gateway
[Gateway] G Configure gateway for DHCP
clients switch(config)#dhcpserver gateway
192.168.1.254
dhcpserver dnsip [DNS
IP]
G Configure DNS IP for DHCP
clients switch(config)#dhcpserver dnsip
192.168.1.1
dhcpserver leasetime
[Hours]
G Configure lease time (in
hour) switch(config)#dhcpserver leasetime
1
dhcpserver ipbinding [IP
address]
I Set static IP for DHCP clients
by port switch(config)#interface fastEthernet
2
switch(config)#dhcpserver ipbinding
192.168.1.1
show dhcpserver
configuration P Show configuration of DHCP
server switch#show dhcpserver
configuration
show dhcpserver clients P Show client entries of DHCP
server switch#show dhcpserver clients
show dhcpserver ip-
binding P Show IP-Binding information
of DHCP server switch#show dhcpserver ip-binding
no dhcpserver G Disable DHCP server
function switch(config)#no dhcpserver
security enable G Enable IP security function switch(config)#security enable
security http G Enable IP security of HTTP
server switch(config)#security http
security telnet G Enable IP security of telnet switch(config)#security telnet