Mac address table, Static mac address – Interlogix GE-DSH-73 Series User Manual User Manual
Page 129

Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
125
This page includes the following fields:
Object
Description
Quiet Period:
Set the period, which the port doesn’t try to acquire a supplicant.
TX Period:
Set the period the port waits for retransmit next EAPOL PDU during
an authentication session.
Supplicant Timeout:
Set the period of time the switch waits for a supplicant response to
an EAP request.
Server Timeout:
Set the period of time the switch waits for a server response to an
authentication request.
Max Requests:
Set the number of authentication that must time-out before
authentication fails and the authentication session ends.
Reauth period:
Set the period of time which clients connected must be re-
authenticated.
MAC Address Table
Use the MAC address table to ensure the port security.
Static MAC Address
You can add a static MAC address that remains in the switch's address table
regardless of whether the device is physically connected to the switch. This saves the
switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. Via this interface, you can add /
modify / delete a static MAC address.
• Add the Static MAC Address
You can add static MAC address in the switch MAC table here.