Product specifications – Interlogix GE-DSH-73 Series User Manual User Manual
Page 10

Chapter 1: Introduction
6
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
• Security
o
IEEE 802.1x Port-Based Authentication
o
MAC address Filtering and MAC address Binding
o
IP address security management to prevent unauthorized intruder
o
Port Mirroring to monitor the incoming or outgoing traffic on a particular port
o
Management
WEB-based, Telnet, Console Command Line management
Access through SNMP v1, v2c and v3 set and get requests
SNMP Trap / SMTP email for alarm notification of events
System Log Server / Client
Configuration backup / restore
E-mail event alert
TFTP firmware upgrade
Support LLDP to allow switch to advise its identification and capability on
the LAN
Product Specifications
Product
GE-DSH-82
GE-DSH-82-PoE GE-DSH-73
Hardware Specification
10/100Mbps Copper Ports
8 10/ 100Base-TX RJ-
45 Auto-MDI/MDI-X
ports
8 10/ 100Base-TX RJ-45
Auto-MDI/MDI-X ports
7 10/ 100Base-TX RJ-
45 Auto-MDI/MDI-X
ports
1000Mbps Copper Ports
2 10/100/1000Base-T
RJ-45 ports
2 10/100/1000Base-T
RJ-45 ports
3 10/100/1000Base-T
RJ-45 ports
SFP/mini-GBIC Slots
2 SFP interfaces,
shared with Port-9
and Port-10
2 SFP interfaces, shared
with Port-9 and Port-10
3 SFP interfaces,
shared with Port-7,
Port-9 and Port-10
Switch Architecture
Store-and-Forward
Switch Fabric
5.6Gbps / non-
blocking
5.6Gbps / non-blocking
7.4Gbps / non-
blocking
Switch Throughput
4.16Mpps @64Bytes 4.16Mpps @64Bytes
5.5Mpps@64bytes
Address Table
8K entries