EVCO EPH4DXP1CT Installer manual User Manual
Page 72

Evco S.p.A.
c-pro 3 CLIMA sistema | Installer manual ver.1.1 | Code 144CP3CSE114
page 72 of 74
8.6.3
Manual functioning mode (MCCT, MCZN, MCPS modules)
The c-pro 3 CLIMA sistema allows to set manual functioning for the various uses.
In this state the devices are not governed by the automatic functions, but are however sensitive to any alarms.
The manual activation of the devices replaces the regulation for the determined device, therefore from now on gives
origin to all automatic controllers for the activation of the system.
For example, if the zone valve is controlled manually, it will be interpreted by the system as thermostatic activation
causing the activation of the relative delivery circulation pump, the mixing valve and the boiler/chiller etc.
The manual functioning of the devices is useful for the execution of functional tests on system start-up or in case or
probe breakage or other.