EVCO EPH4DXP1CT Installer manual - Manual (Page 31)

Evco S.p.A. c-pro 3 CLIMA sistema | Installer manual ver.1.1 | Code 144CP3CSE114
page 31 of 74
5.9 Main OFF page
The main OFF page changes depending on the reason for which the unit is off.
The unit in OFF alarm can be switched off completely using the key, digital input or supervisor.
This type of display is temporary. When the 30 seconds time-out has passed, the controller will go back to the display
of the main ON page, however indicating the OFF state of the unit.
5.10 Main ON page
The main page is displayed during the ON state:
Pressing the DOWN key, it is possible to scroll all information contained in the page (External Temperature,
Temperature of all the supply lines). Pressing the ESC key, you can access Main Menu and by States Pages.
5.11 State pages
By accessing the state pages from the ON main page, access the following four screens representing the machine
states of the c-pro 3 mega MCCT controller and the entire controlled system.
5.11.1 Stat e page supply lines L1 to L6
The status pages Supply line from 1 to 6 show, and the status of the line described in the above illustration, the
percentage of opening of the mixing valve, the water temperature of the flow line, the working setpoint active and
calculation the dew point for the corresponding line.
Press RIGHT on the ">" to go to the next page of state, corresponding to the Supply line 2.
Pressing RIGHT on the ">" to go to the next page of state, ie the status page/access SOLAR PANELS.
After the expiration of time-out of 30 seconds or by pressing ESC controller will return to the main page is displayed
ON.
5.11.2 State page and access to the MCPS solar panels module
The status page and access to the module solar panels MCPS shows the status of the network.
Pressing ENTER on the state of the module MCPS (with MCPS module enabled and online), you can access the
controller MCPS.
After the expiration of time-out of 30 seconds or by pressing ESC controller will return to the main page is displayed
ON.
5.11.3 State and access page of the MCZN zone regulators modules
The status page and access regulator modules MCZN area shows the status of the network of regulators MCZN
described in the above illustration.
Pressing ENTER on the ">" at the top right of the screen to return to the status page SUPPLY LINE L1.
Pressing ENTER on the state of the module MCZN selected (with module MCZN present, enabled and online), you can
access the corresponding application MCZN.
After the expiration of time-out of 30 seconds or by pressing ESC controller will return to the main page is displayed
ON.