1 access a c-pro 3 hecto+ mczn zone regulator – EVCO EPH4DXP1CT Installer manual User Manual
Page 22

Evco S.p.A.
c-pro 3 CLIMA sistema | Installer manual ver.1.1 | Code 144CP3CSE114
page 22 of 74
4.2
Navigation through the applications making up the
system
The c-pro 3 hecto+ MCCT controller represents the heart of the c-pro 3 CLIMA sistema, also from a user interface
point of view.
To access the other system components, the procedure given in the following paragraphs must be followed.
4.2.1
Access a c-pro 3 hecto+ MCZN zone regulator
To access one of the c-pro 3 hecto+ MCZN zone regulators present in the system, access the “Regulators state in
serial network” page present in the “States” section and select the regulator to which access is to be made from the
list of regulators available.
4.2.2
Access the regulator for c-pro 3 hecto MCPS solar panels
To access the regulator for c-pro 3 hecto+ MCPS solar panels present in the system, the “Solar panels functioning
state” page must be accessed, present in the “States” section and select to access the MCPS regulator (if configured).