beautypg.com

7 installer menu – EVCO EPH4DXP1CT Installer manual User Manual

Page 52

background image

Evco S.p.A.

c-pro 3 CLIMA sistema | Installer manual ver.1.1 | Code 144CP3CSE114

page 52 of 74

Entering the GENERAL PARAMETERS menu, it is possible to enable/disable and set the parameters relative to the

execution of the Antigrip and Antilegionella cycles, as well as the calibration of the signals coming from the

temperature probes.

From the PANELS MAINTENANCE menu, it is possible to enable/disable and set the parameters relative to the periodic

activation cycles of the solar panels heat pumps and the solar panels Antistagnation function. The

activation/deactivation differentials of the pumps are set as well as the minimum and maximum temperature limits for

the two circuits.

The AUX 1 MANAGEMENT menu allows to set the parameters relative to the management of the Auxiliary, defining the

circulation pump activation mode, the plant type where it is placed, the water work set-point, its differential and the

calibration of the auxiliary probe.

Entering the DHW MANAGEMENT menu, it is possible to set an activation delay of the DHW circuit circulation pump.

For all flow switches present in the MCPS application, the FLOW SWITCHES menu allows to set a delay time from

machine ON, a delay time in normal conditions and the number of alarms with manual rearm in order to pass to the

necessity for automatic rearm of the alarm.

The MANUAL menu allows to set the functioning of the utilities managed by the application in manual/automatic mode,

thus forcing the state, to test its functionality.

Finally, the TIME COUNTER menu allows to display, enable, set and reset the functioning hours and the maintenance

requests for the users to manage the MCPS application.

7.4.7

Installer menu

The installer menu is level 2, i.e. used to insert the installer level password or higher in order to display/modify the

parameters present in this branch.

From this menu it is possible to view and set the configuration of the DHW system, the solar panels system/s and the

auxiliary system and their controls.

Entering the I/O CONFIGURATION menu it is possible to view the type of analogue inputs set in the application and set

the polarity of the digital inputs used.

Entering the GENERAL PARAMETERS menu, it is possible to define the main features present in the regulator for solar

panels, i.e. the name of the MCPS regulator, the number of solar panel circuits present in the system, the presence or

not of the auxiliary circuit, the number of temperature probes present in the DHW tank, the type of digital inputs for

protection of the circulation pumps and the features of the serial communication parameters both CANbus (c-pro 3

CLIMA sistema controllers network) and Modbus (towards the RICS supervision system or other BMS systems).

Entering the SOLAR PANELS menu it is possible to set the calibration of the solar panels temperature transducers, also

defining their minimum and maximum calibration values.

Finally the PASSWORDS menu allows to display and modify the 3 password levels present in the application.

This manual is related to the following products: