EVCO EPH4DXP1CT Installer manual - Manual (Page 51)

Evco S.p.A. c-pro 3 CLIMA sistema | Installer manual ver.1.1 | Code 144CP3CSE114
page 51 of 74
7.4 Main menu
By accessing the pages of the main menu from the “Main Page” of the MCPS regulator, access the setting pages of all
regulator functioning parameters organised in the following sub-menu:
7.4.1 Alarms/log menu
This menu contains the functionality linked to the controller alarms and the alarms log of the system.
7.4.2 Alarms log
To view the MCPS regulator alarms log, press ENTER on “storico allarmi (alarms log)”.
If there are no elements present, “NO ALLARMI” (NO ALARMS) is displayed, otherwise the following page is proposed,
where the information of the last element memorised in the log is given:
To view the previous element, press ENTER on “>>”. By repeating this procedure, scroll all log elements until the first
element inserted is reached. From here, on request of the next element, the last element memorised is re-proposed:
the log display is circular.
To exit the log pages, press the ESC key or wait 60 timeout seconds. This level is not protected by a password.
7.4.3 Reset active alarms
To view the active alarms of the MCPS regulator, press ENTER on “Rst running alarms” .
If there are no alarms present, “no alarms” is displayed, otherwise a series of pages appear containing all possible
alarms present in the controller with relative codes and description.
The alarm or the alarms present, will be highlighted by flashing "Rst ALARM”.
If the ESC key is pressed from an alarm page or 60 timeout seconds are allowed to pass, you go back to the main
page of the application. This level is not protected by a password.
7.4.4 Reset alarms log
To reset the memorised alarms log, press ENTER on “Rst storico allarmi” (Rest alarms log) and take the value of the
“Cancellazione totale elementi storico in memoria (Total cancellation of log elements in memory)” parameter to the
“Yes” value.
To exit the alarms log reset pages, press the ESC key or wait 60 timeout seconds. This level is not protected by a
password.
7.4.5 Set-point menu
From this menu it is possible to display and set the temperature work set-point for the DHW tank and for the AUX1
auxiliary circuit.
If the ESC key is pressed from a setting page or 240 timeout seconds are allowed to pass, you go back to the main
page of the application. This level is not protected by a password.
7.4.6 Maintenance menu
The maintenance menu is level 1, i.e. used to insert the maintenance level password or higher in order to
display/modify the parameters present in this branch.
From this menu it is possible to enable and set all features relative to the functions linked to the DHW tank and the
DHW circuits, solar panels and auxiliaries, contained in the MCPS application and precisely.