EVCO EPH4DXP1CT Installer manual - Manual (Page 23)

Evco S.p.A. c-pro 3 CLIMA sistema | Installer manual ver.1.1 | Code 144CP3CSE114
page 23 of 74
5 c-pro 3 hecto+ MCCT regulator
Through the module, you can manage the circulation pumps, boiler and chiller-heat pump.
It is able to manage up to two discharge lines (expandable to four by using the expansion I / O c-pro 3 hecto + EXP),
eight modules and a module area of solar thermal panels.
5.1 List of pages
This paragraph presents the main pages and menus found in the MCCT application. As shown previously, the main
menu is divided into 3 levels: user, maintenance technician and installer.
A “States” section is also present that can be consulted freely, also necessary for navigation between modules.
5.2 Menu
The menu interface from the controller or from 128x64 V-Graph public (as above). The new interface will match the
standard EVCO
5.2.1 Home page:
From the home by pressing ESC will display the screen below that allow you to access the menu or to the various
states