Citizen Systems BD2-2220 - Manual (Page 44)

- 44 -
ESC - n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Specifying /canceling underline
[Code] < 1B>H<2D>H
[Range] 0≦n≦2、48≦n≦50
[Outline] [The specification which is common to the model]
Specifying /canceling an underline.
n Function
0,48 Canceling underline
1,49 Setting 1-dot width underline
2,50 Setting 2-dot width underline
[Caution] • An underline is attached to the full character width. It is, however, not attached to the part having
been skipped by horizontal tab (HT) command.
• An underline is not attached to 90°-right-turned characters and white-on-black character.
• Underline can also be specified/canceled by ESC ! but the setting of command last processed is
valid.
• Specifying/canceling by this command is not valid for kanji.
• Underline width is constant in the specified thickness regardless of the character size.
[Default] n=0
Underline canceled
Underline specified
ＡＡＡＡＡＡＡＡＡＡ
[See Also] ESC ! 、 FS -
[Sample Program] [Print Results]
LPRINT CHR$(&H1B);"-"; CHR$(0);
LPRINT "AAAAA";
LPRINT CHR$(&H1B);"-"; CHR$(1);
LPRINT "AAAAA"; CHR$(&HA);