Citizen Systems BD2-2220 - Manual (Page 101)

- 101 -
ESC m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Partial cutting of paper
[Code] < 1B>H<6D>H
[Outline] [The specification which is common to the model]
Executes partial cutting of paper.
[Caution] [The specification which is common to the model]
• This command only works it is entered at the beginning of a line.
• Before cutting paper, feed the paper more than the cutting position of paper from the print
position. Without this paper feeding, the character just after printing remains before the cutter.
[The specification which depend on the model]
CT-S300 / CT-S2000 / CT-S4000 / CT-S310 / PMU2XXX
• With label- or BM-supported model, this command does not function at the setting of BM
paper/label paper setting.
[Sample Program] [Print Results]
Cut state
AAAAA
Cut position
AAAAA
Paper feed
direction
LPRINT “AAAAA”;
LPRINT CHR$(&H1B);"J";
LPRINT CHR$(150);
LPRINT CHR$(&H1B);"m";