Citizen Systems BD2-2220 - Manual (Page 170)

CT-S280
• a = 5: Sets printing density to the level specified by (nL+nHx256). • a = 116: Sets the paper specified by (nL+nHx256).
(nL+nHx256) Printing Density (nL+nHx256) Paper
65530 70% 1 (Default) Specified single color paper.
65531 75%
257 Recommended 2-color paper5
65532 80%
65533 85%
65534 90%
65535 95% • a = 201: Outputs ACK to the position specified by (nL+nHx256).
0(Default) 100%
1 105%
(nL+nHx256) ACK Output Position
2 110%
1 (Default) ACK-in-Busy 3 115%
2 ACK-while-Busy 4 120%
3 ACK-after-Busy 5 125%
6 130%
7 135%
8 140%
• a = 202: Controls input buffer full Busy with the value selected by
(nL+nHx256) and controls Busy with output/cancel timing
(remaining capacity).
• a = 6: Sets printing speed to the value specified by (nL+nHx256).
When Input Buffer
Capacity 4K Bytes
(Large) is Set
When Input Buffer
Capacity “Small” is Set
(nL+nHx256) Printing Speed
(nL+nHx256)
Printing speed level 1 (84%) 1
2
Printing speed level 2 (86%) Output Cancel Output Cancel
1 16 26 128 256 Printing speed level 3 (88%) 3
2 16 40 128 512
Printing speed level 4 (90%) 4
3 30 50 72 256
Printing speed level 5 (92%) 5 4 30 60 72 512
6 Printing speed level 6 (94%) • XON/XOFF is also output by the establishment of conditions.
7 Printing speed level 7 (96%) • Ignores the data received when input buffer idle capacity is 0.
Printing speed level 8 (98%) 8
Printing speed level 9 (100%) 9 (Default)
- 170 -