Citizen Systems BD2-2220 - Manual (Page 142)

- 142 -
FS ( A pL pH fn […]
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Setting font attribute of Kanji
[Outline] Setting Kanji font attribute means execution of processing for Kanji font attribute by the value of
“fn” specified.
fn Function
48 Sets Kanji font
[Outline] [The specification which is common to the model]
This command is effective only for the Japanese Japanese Kanji specifications.
fn=48： Function 48 Set Kanji fonts
FS ( A pL pH fn m
[Code] < 1C>H<28>H<4E>H < pH>< fn>< m>
[Range] (pL+pH×256)＝2：（pL=2、pH=0）
fn=48
0≦m≦2、48≦n≦50
[Default] m=0
[Outline] [The specification which is common to the model]
Prints the succeeding characters with energy set for “m”.
This command is effective only for the Japanese Japanese Kanji specifications.
[The specification which depend on the model]
CT-S280 / CT-S300 / BD2-2220 / CT-S310 / PMU2XXX
m Function
0、48 Kanji font A(24×24)
1、49 invalid
2、50 Kanji font C(16×16)
CT-S2000/ CT-S4000
m Function
0、48 Kanji font A(24×24)
1、49 Kanji font B(20×24)
2、50 Kanji font C(16Ч16)