Citizen Systems BD2-2220 - Manual (Page 218)

- 218 -
2-dimensional code da
fn=82： Function 182 Sending the size of 2-dimensional code data in
ta storage area
GS ( k pL pH cn fn m
[Code] < 1D>H<28>H<6B>H
[Range] (pL+pH×256)=3(pL=3、pH=0)
cn=49
fn=82
m=48
[Outline] [The specification which depend on the model]
Sends the size information when printing 2-dimensional data stored in the 2-dimensional
code data storage area.
Hex Decimal Data size
Header 37H 55 1 byte
Identifier 2FH 47 1 byte
30H～39H 48～57 1～5 bytes Horizontal size
Separator 1FH 31 1 byte
30H～39H 48～57 1～5 bytes Vertical size
Separator 1FH 31 1 byte
Fixed value 31H 49 1 byte
Separator 1FH 31 1 byte
Other info 30H or 31H 48 or 49 1 byte
NUL 00H 0 1 byte
• “Horizontal size” and “Vertical size” indicate the number of dots of QRCode.
• Other info indicates whether symbol is printable or not.
Hex Decimal Information
30H 48 Printable
31H 49 Not
printable
[Caution] • QRCode is not printed with the processing of this function.
• Quiet zone (blank area around QRCode symbol) is not included in the size information.