Citizen Systems BD2-2220 - Manual (Page 293)

- 293 -
4.2.10 MSW10
●MSW10-1： Print density
[Outline] Select the print density.
Setting Value
Print Density
70%,75%,80%,85%,90%,95%,100%,105%,
110%,115%,120%,125%,130%,135%,140%
●MSW10-2： Print speed
[Outline] Select the print speed.
Setting Value
Print Speed
Level1,Level2,Level3,evel4,Level5,Level6,
Level7,Level8,Level9
●MSW10-3： ACK output timing
[Outline] Select the ACK signal output timing in parallel interface.
Setting Value
ACK Timing Before Busy,Same Period , After Busy
●MSW10-4： user NV memory capacity
[Outline] Specify user NV memory capacity.
Setting Value
NV User 1Kbytes,64Kbytes,128Kbytes,192Kbytes
●MSW10-5： NV graphics memory capacity
[Outline] Specify NV graphics memory capacity.
Setting Value
NV Graphic
0bytes,64Kbytes,128Kbytes,192Kbytes,
256Kbytes,320Kbytes,384Kbytes