Citizen Systems BD2-2220 - Manual (Page 100)

- 100 -
2.2.11 Cutter Commands
ESC i
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Full cutting of paper
[Code] < 1B>H<69>H
[Outline] [The specification which is common to the model]
Executes full cutting of paper.
[Caution] [The specification which is common to the model]
• This command only works it is entered at the beginning of a line.
• Before cutting paper, feed the paper more than the cutting position of paper from the print
position. Without this paper feeding, the character just after printing remains before the cutter.
[The specification which depend on the model]
CT-S300 / CT-S2000 / CT-S4000 / CT-S310 / PMU2XXX
• With label- or BM-supported model, this command does not function at the setting of BM
paper/label paper setting.
[Sample Program] [Print Results]
Cut state
LPRINT “AAAAA”;
AAAAA
Cut position
AAAAA
Paper feed
direction
LPRINT CHR$(&H1B);"J";
LPRINT CHR$(150);
LPRINT CHR$(&H1B);"i";