Citizen Systems BD2-2220 - Manual (Page 151)

- 151 -
GS p n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Changing paper type
[Code] < 1D>H <70>H
[Range] 0≦n≦255
n=0 specify receipt paper
n=1 specify black mark paper
n=2 specify label paper
[Outline] [The specification which is common to the model]
• Switches paper.
• Switches to receipt paper (mode).
Ignores this command when receipt mode is set.
• Switches to BM paper mode.
Measures paper length or sets first position of paper in accordance with the MSW setting.
Ignores this command when BM paper mode is set.
• Switches to label paper mode.
Measures paper length or sets first position of paper in accordance with the MSW setting.
Ignores this command when label paper mode is set.
[Caution] • Processed after buffering.
• This command is not initialized by the initialization command.
• This command is initialized by power OFF and paper type set by MSW is valid from the
next power ON.
• When BM paper/Label paper mode is changed to receipt mode
Change the paper to receipt paper after sending this command (n=0) with BM
paper/label paper set. If the paper is changed to receipt paper beforehand, sensing the
first position is not available when closing the cover, resulting in BM/label detection error.
• When receipt mode is changed to label mode
Send this command (n=1) after changing the paper from receipt paper to label paper.
If this command is sent beforehand, label detection error is caused.