Gs ( e pl ph fn, Gs ( e – Citizen Systems BD2-2220 User Manual
Page 153
- 153 -
GS ( E pL pH fn […]
CT-S280
CT-S300
CT-S2000
CT-S4000
BD2-2220
CT-S310
support model
PMU2XXX
[Function]
Printer function setting command
[Outline]
[The specification which is common to the model]
Printer function setting command is a command to change the function of the printer stored on the
non-volatile memory and executes the function set by the value of “fn”.
Function No.
(fn)
Function
Transfers to printer function setting mode.
Terminates printer function setting mode.
Sets memory switch value.
Sends memory switch value set.
Sets customize value.
Sends customized value set.
Copies user-defined page.
Defines the data in column format to the character code page of work area.
Defines the data in raster format to the character code page of work area.
Erases the data of character code page of work area.
Sets the communication condition of serial interface. (Note)
Sends the communication condition of serial interface set.
Sets all contents set in printer function setting mode to the state at the time of
shipment.
• pL, pH set the number of bytes following “fn” to (pL + pH 256).
• At the end of printer function setting mode (Function 2), resetting is executed. Then the input
buffer is cleared to return various kinds of setting to the state at the time of power on.
• The set value can be confirmed without transferring to printer function setting mode by functions
4, 6, and 12.
• Other functions do not operate without transferring to printer function setting mode.
[Caution]
• This command allows writing to non-volatile memory. Therefore, using this command frequently
may result in breakage of memory. Use this command appropriately [10 times max./day].
• During execution of this command, the printer is in Busy state and stops receiving operation.
Therefore, data transmission from the host is prohibited.