Citizen Systems BD2-2220 - Manual (Page 232)

CT-S4000
n Type of Printer ID Specification Value (Hex.) • Printer information configuration on and after transmitted n=65 is shown
below. 1、49 CT-S4000 55 Model ID
Kind of Printer
Information
2、50 Type ID Refer to table “Type ID” below n Information
3、51 ROM version ID Differs by ROM version.
65 Firmware version Differs by firmware version.
Black mark/ Label
Length
Depends on Black mark paper/ Label
paper (mm)
4、52 66 Manufacturer name CITIZEN
67 Model name CT-S4000
Japanese Kanji specifications: KANJI
Type ID If n = 2, 50 is specified: Kinds of multi-language
fonts
Hangul specification：KOREA 69
Bit Meaning Hex. Decimal
Chinese specifications：CHINA GB18030
0 Equipped for 2 byte code support 01 1
Refer to table “DSW” below
112 State of DSW 1 Equipped with auto cutter 02 2
(only serial model)
Thermal paper 00 0
2 Black mark paper/ Label paper
(when Black mark paper/ Label paper is selected)
04 4 • Sends printer information specified by n=65 or more.
Hex. Number of Data
3 Undefined -- --
Header 5FH 1 4 Unused 00 0
5 Undefined -- -- 20H～7FH Data Subject to item to be responded
6 Undefined -- --
NULL 00H 1
7 Unused 00 0
n = 4, 52 specified (only for B.M/Label specs)
DSW If n = 112 is specified:
The Black mark length/label gap length and mark interval/label length
currently used are returned in 4-byte code.All fractional parts in
millimeters are rounded off.
Bit Function Hex. Decimal
Dip switch [DSW5] is OFF 00 0
0
Dip switch [DSW5] is ON 01 1 Byte 1 + Byte 2 x256 = Black mark interval
Dip switch [DSW6] is OFF 00 0 Byte 3 + Byte 4 x256 = Black mark length mm
1
Dip switch [DSW6] is ON 02 2
Dip switch [DSW7] is OFF 00 0
(1)
(2)
2
Dip switch [DSW7] is ON 04 4
Dip switch [DSW8] is OFF 00 0
3 (1) (2)
Dip switch [DSW8] is ON 08 8
4 Reserved 00 0
5 Reserved 00 0
6 Fixed 40 64
7 Fixed 00 0 BM paper Label paper
* only serial model
- 232 -