Citizen Systems BD2-2220 - Manual (Page 152)

- 152 -
2.2.16 Printer Function Setting Commands
GS ( D pL pH m [a1 b1]...[ak bk]
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Enabling or disabling real-time command
[Code] < 1D>H<28>H<44>H< pH>< m> [< b1>］…[< bk>]
[Range] 3≦(pL+pH×256)≦65535
m＝20
a＝1
b＝0、1、48、49
[Outline] [The specification which is common to the model]
Enables/disables the following real-time command processing.
Function a b
0、48 Does not process DLE DC4 fn m t (fn = 1). (Invalid)
1
1、49 Processes DLE DC4 fn m t (fn = 1). (Valid)
• pL and pH sets the number of bytes on and after m in (pL + pH x256).
• “a” sets the kind of real-time command.
• “b” sets Valid or Invalid.
• When data raw that meets the code configuring real-time command in the image data, it is
recommended that the real-time command be set to invalid by this command.
[Default]
Type of Real-time Command Initial Value a
DLE DC4 fn m t (fn=1): Real-time output of pulse specified Valid 1