KEYENCE GL-RHG Series - Manual (Page 98)

6-5 Starting and Exiting the GL-R Configurator
6-10 GL-RHG-M-NO6-E
Mo
ni
to
ring
me
th
o
d
U
sin
g t
h
e C
o
nf
ig
u
ra
tio
n
Sof
tw
are
6
 When "Create a new configuration file" is selected
When "Create a new configuration file" is selected, the [Unit configuration] dialog box appears.
When entering the model information for configuration, the GL-R configurator starts with the default value
for each setting.
Point
• If the contents set in this section differ from the settings of the connected GL-RHG,
monitoring is impossible.
• The unit note cannot be sent to the GL-RHG main unit.
Item Description
(1) Download unit configuration
from GL-RHG.
Download the configuration of the connected GL-RHG main unit. (The existing model and settings
previously entered will be discarded and replaced with the downloaded information.)
(2) Main unit model Select the minimum detectable object size and model (number of beam axes) of the main unit.
(3) Unit note
A note can be added to each unit. (Up to 10 double-byte characters, and 20 single-byte
characters.)
(4) Sub unit
For serial connection, select the checkbox and enter the sub unit information. (Up to 20 characters
regardless of double-byte character or single-byte character)
"Series connection" (page 2-3)
(5) Error if sub unit
configuration is different
from GL-RHG. This function cannot be used with GL-RHG.
(1)
(2)
(3)
(4)
(5)