KEYENCE GL-RHG Series - Manual (Page 63)

3-5 Cable Installation
3-15 GL-RHG-M-NO3-E
In
sta
llatio
n
to
a Mac
h
in
e
3
Cable connection to the lower part of the GL-RHG (The unit connection cable and extension cable)
Reference The unit connection cable and extension cable can be used for both the transmitter and receiver.
Cable connection to the upper part of the GL-RHG (The series connection cable)
Reference The series connection cable can be used on both the transmitter and receiver.
M3 cross slot screws (Recommended tightening torque of 0.3 N•m)
DANGER
When the GL-RHG units are wired by the one-line system, the end cover removed from the
upper part of the GL-RHG must be secured to the lower part with the screw. (Recommended
tightening torque of 0.3 N•m)
1
M3 cross slot screws
2
M3 cross slot screws
(Recommended tightening torque of 0.3 N•m)
Endcover