KEYENCE GL-RHG Series - Manual (Page 97)

6-9 GL-RHG-M-NO6-E
Mo
ni
to
ring
me
th
o
d
U
sin
g t
h
e C
o
nf
ig
u
ra
tio
n
Sof
tw
are
6
6-5
Starting and Exiting the GL-R Configurator
Starting the
Start the according to the following procedure.
Point Only one window can be run at a time.
1
Double-click the [KEYENCE Safety Device Configurator] shortcut icon on the desktop. If the icon
is not present on the desktop, select [All Programs (or Programs)]  [Safety Device Configurator]
or [GL-R Configurator] in [Keyence Applications].
Double-clicking the shortcut icon will display the Configurator selection screen.
Select [GL-R Configurator]. If the powered-on GL-RHG main unit is connected via USB, this item is
skipped.
2
The GL-R Configurator starts with the main selection screen.
3
Select the desired software mode and click the [OK] button.
 When "Download a configuration file from GL-RHG" is selected
When [Download a configuration file from GL-RHG.] is selected, the configuration from the connected
GL-RHG main unit is downloaded and the software starts.
Point
• Before selecting [Download a configuration file from GL-RHG] and clicking the [OK] button,
confirm that the PC and the GL-RHG main unit are properly connected with the USB cable.
• Confirm that the GL-RHG main unit is turned on.
• If the communication is aborted before downloading is complete, the configuration is not
reflected in the software. Click the [Download] button on the tool bar to read again, or create
a new configuration.