KEYENCE GL-RHG Series User Manual
Page 68
3-7
Mounting Brackets
3-20
GL-RHG-M-NO3-E
In
sta
llatio
n
to
a Mac
h
in
e
3
Antivibration bracket for the adjustable angle mounting bracket (GL-RB32)
If the length for a single GL-RHG unit is 1280 mm or greater, and you use the adjustable angle mounting
bracket or no dead zone mounting bracket, use the antivibration bracket for the adjustable angle mounting
bracket additionally as an intermediate support bracket.
For more information about the mounting position, see
1
Install the antivibration bracket for the adjustable angle mounting bracket to the machine.
The screws for installation to the machine are not supplied. Please acquire on your own.
2
Insert convex A on the back side of the elastomer part into the groove on the metal part.
3
Insert convex B on the antivibration bracket into the GL-RHG along the groove on the back side of
the GL-RHG.
The vibration from the machine to GL-RHG is suppressed by the antivibration mounting bracket between
the machine and GL-RHG. The GL-RHG must be installed on the machine with the mounting brackets.
M5 or M6
Rubber
Convex B
Metal part
When installed in front direction
When installed in 90° direction
Convex A