Precautions on regulations and standards, Ce marking, Ul certificate and north american regulations – KEYENCE GL-RHG Series User Manual
Page 8
6
GL-RHG-M-NO0-E
Precautions on Regulations and Standards
CE Marking
Keyence Corporation has confirmed that this product complies with the essential requirements of the
applicable EC Directive, based on the following specifications.
Be sure to consider the following specifications when using this product in a member state of the Euro-
pean Union.
Machinery Directive (2006/42/EC)
The GL-RHG is a safety component as established by the European Union's Machinery Directive
(2006/42/EC) Annex V. The GL-RHG complies with the following EN Standards and has been certified
by TÜV SÜD Product Service GmbH.
•
EN61496-1
Type 4 ESPE
•
EN61496-2
Type 4 AOPD
•
EN50178
•
EN61508, Part 1 to 4
SIL3
•
EN62061
SIL CL3
•
EN ISO13849-1
Category 4, PL e
EMC Directive (2004/108/EC)
The GL-RHG complies with the following EN Standards
•
EN55011
Class A
•
EN61496-1
Type 4 ESPE
These specifications do not give any guarantee that the end-product with this product incorporated
complies with the essential requirements of the EMC Directive. The manufacturer of the end-product is
solely responsible for the compliance of the end-product itself according to the EMC Directive.
UL Certificate and North American Regulations
The GL-RHG complies with the following North American and international standards and has received
UL certification and C-UL certification. (CCN: NIPF/NIPF7, File No: E184802)
•
UL61496-1
Type 4 ESPE
•
UL61496-2
Type 4 AOPD
•
UL508
•
UL1998
The GL-RHG also complies with the following North American regulations.
•
FCC Part 15B
Class A Digital Device
•
ICES-003
Class A Digital Apparatus
Type examination based on the Chinese standard GB 4584 "压力机用光电保护装置
技术条件"
GL-RHG has passed the type examination based on the Chinese standard GB 4584 "压力机用光电保护装
置技术条件"
.
•
Quality test certificate certificate number: No.20120929
However, if the response time (ON OFF) exceeds 20ms, this product cannot be used as a certified
product. The following two conditions may cause the response time to exceed 20 ms.
•
Using GL-RHG in the optical synchronization system and selecting channel A or B
•
Make series connection of GL-RHG
"Wiring System" (page 2-2)
"Series connection" (page 2-3)
"Response time (OSSD)" (page 7-5)