3 names and functions of each part, Names and functions of each part -4, Names and functions of each part – KEYENCE DL-EP1 User Manual
Page 14
1-4
1
B
efo
re
U
sin
g
- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (IL) -
1-3
Names and Functions of Each Part
This section describes the part names and functions of the DL-EP1.
(8) Sensor amplifier connector
(for DIN rail mount type)
(1) RJ-45 connector
(2) Reset switch
(3) Link/activity indicator (green)
(4) Module status indicator (green/red)
(5) Network status indicator (green/red)
(6) Sensor communication indicator
(green/red)
(7) MAC address
(9) Sensor amplifier connector
(for panel mount type
and large display type)
Name
Description
(1) RJ-45 connector
Attach the network cable to this connector.
(2) Reset switch
When held down for three seconds or longer, the DL-EP1
settings will be reset to the default settings.
For details, refer to
"Default Settings" (Page 5-5).
(3) Link/activity
indicator
Normal: Green LED lights up or blinks
For details, refer to
(4) Module status
indicator
Normal: Green LED lights up
For details, refer to
(5) Network status
indicator
Normal: Green LED lights up
For details, refer to
(6) Sensor communication
indicator
Indicates the status of communication between the DL-
EP1 and sensor amplifiers.
Normal: Green LED lights up
For details, refer to
(7) MAC address
MAC address for this DL-EP1
(8) Sensor amplifier
connector (for DIN rail
mount type)
Attach the sensor amplifier to this connector. When not
using this connector, remove it and replace with the
protective sticker.