8 user defined methods – Metrohm 788 IC Filtration Sample Processor User Manual
Page 94
4 Operation
788 IC Filtration Sample Processor
86
4.3.8
User defined methods
USER
METHOD
The
fined methods, which can be stored and recalled under freely select-
able names. A method comprises the parameters defined under the
key. The key opens the following main menu:
methods
>recall method
Recall method
methods
>store method
Store method
methods
>delete method
Delete method
Repeated pressing of the
menus in turn. Use <Ð> or <Ï> to move up or down one menu item;
use
spectively. The submenu is opened with
to the normal state. The following listings show all dialog items which
appear under
the default values, the possible entry values or ranges are shown below
the display.
methods
>recall method
Recall existing method
>recall method
method: ********
8 ASCII characters
Selection of the method
With
an "empty" method is to be loaded, the method
'********'
can be selected. Like this, the actual work
memory is deleted.
methods
>store methods
Storage of methods
>store methods
method: ********
8 ASCII characters
Define method name
"<" or ">" activates text edit mode where any method
name desired can be entered (see section 4.1.6).
When a certain method should be worked off after
switching on the 788 IC Filtration Sample Processor, a
command sequence can be stored under the name
'POWERUP'
. This method is started automatically after
switching on the main switch (see section 4.3.9).