Metrohm 788 IC Filtration Sample Processor - Manual (Page 63)

4.1 Fundamentals of operation
788 IC Filtration Sample Processor
55
4.1.3 Overview of key functions
Key Normal state Edit mode
CONFIG
Open the configuration menu
x The key opens the
selection menu for the configuration
of the 788 IC Filtration Sample
Processor .
x The settings in the configuration
menu remain constant until they are
changed or the working memory
(RAM) for the configuration settings
is re-initialized.
Select configuration settings
x When the configuration menu is
open, pressing the key
displays the next menu line.
x After the last line is displayed, the
first one follows.
x exits the menu.
PARAM
Open the parameter menu
x The key opens the
selection menu for the changer
settings.
x All settings that are set in the
parameter menu belong to a
method and will be saved with the
method. These parameters are
method-specific.
Select method parameters
x When the parameter menu is open,
pressing the key dis-
plays the next menu line.
x After the last line is displayed, the
first one follows.
x exits the menu.
USER
METHOD
Open the user method menu
x The key opens
the selection menu for the loading,
saving and deletion of user-defined
methods.
Select method functions
x When the user method menu is
open, pressing the
METHOD> key displays the next
menu line.
x After the last line is displayed, the
first one follows.
x exits the menu.
HOME
Bring lift to zero-position
x The key runs the lift with
the needle to the zero-position
(0 mm), i.e. to the upper stop.
Select the first line of a menu
x With the key, the first
line in a menu or a sequence can
be accessed.
x Any data that has been altered in a
menu or command line is not car-
ried over (see key).