Metrohm 788 IC Filtration Sample Processor - Manual (Page 77)

4.2 Basic settings
788 IC Filtration Sample Processor
69
4.2 Basic settings
4.2.1 Configuration – key
CONFIG
The key is used for the entry of basic settings of general
applicability. If you have changed the configuration, press or
switch on and off the instrument to make the entries effective. The
key opens the following main menu:
configuration
>auxiliaries Various general instrument settings
configuration
>rack definitions Sample rack settings
configuration
>RS232 settings Settings for RS232 interface
Repeated pressing of the key selects the submenus in
turn. Use <Ð> or <Ï> to move up or down one menu item; use
or to move to the first or last menu item respec-
tively. The submenu is opened with , returns to the
normal state. The following listings show all dialog items which appear
under . The values shown in the display are the default val-
ues, the possible entry values or ranges are shown below the display.
configuration
>auxiliaries General instrument settings
>auxiliaries
dialog: english
english,deutsch,
français,español
Dialog language
english English
deutsch
German
français French
español Spanish
>auxiliaries
display contrast 3
0}7
Display contrast
0 = large contrast
7 = weak contrast