Metrohm 788 IC Filtration Sample Processor - Manual (Page 80)

4 Operation
788 IC Filtration Sample Processor
72
configuration
>RS232 settings Settings for RS232 interface
For further details on the RS232 interface, see section 5.2.
>RS232 settings
baud rate: 9600
9600,4800,2400,
1200,600,300
Data transmission rate (baud rate)
Data transmission rate in bit/s
>RS232 settings
data bit: 8
7,8
Data bits
>RS232 settings
stop bit: 1
1,2
Stop bits
>RS232 settings
parity: none
none,odd,even
Parity
none Parity is not checked.
odd Odd parity.
even Even parity.
>RS232 settings
handshake: HWs
HWs,HWf,
SWchar,SWline,none
Handshake
HWs Reduced hardware handshake.
HWf Full hardware handshake.
SWchar Software handshake with character stop.
SWline Software handshake with line stop.
none No handshake.
For detailed information on the handshake, see section
5.2.8.
>RS232 settings
character set: IBM
IBM,HP,Epson,
Seiko,Citizen
Character set for printer or PC
The settings for the printers recommended by Metrohm
are listed in section 2.7.2. For printers not listed, the set-
ting 'Epson' is recommended. In any case the printer
handbook should be consulted. For data transfer with
personal computers, 'IBM' must be chosen.
>RS232 settings
RS control: ON
ON,OFF
Control via RS232 interface
ON Data receipt via RS232 interface switched
on.
OFF Data receipt via RS232 interface switched off
(no external control via RS232 possible).