Metrohm 788 IC Filtration Sample Processor - Manual (Page 46)

2 Installation
788 IC Filtration Sample Processor
38
2.6.1 IC system without suppression
The 788 IC Filtration Sample Processor is connected to an IC system
without suppression consisting of 732 IC Detector, 733 IC Separation
Center and 709 IC Pump as shown in Fig. 18 using the 6.2141.110
cable. With this interconnection the standard methods 'PC' , 'PC Seg' ,
'SP' and 'SP Seg' can be used (see section 4.6).
732
733
709
788
Abb. 18: Interconnection with IC system without suppression
2.6.2 IC system with suppression with 788 as "Master"
The 788 IC Filtration Sample Processor is connected to an IC system
with suppression consisting of 732 IC Detector, 733 IC Separation
Center, 709 IC Pump and either 752 Pump Unit or 753 Suppressor
Module as shown in Fig. 19 using the 6.2125.120 adaptor. With this
interconnection, in which the 788 IC Filtration Sample Processor is the
"Master", the standard methods 'SP' and 'SP Seg' can be used (see
section 4.6).
732
733
709 753
752
Abb. 19: Interconnection with IC system with suppression with
788 as "Master"
6.2125.090 cable
6.2125.090 cable
6.2125.060 cable
6.2125.060 cable
6.2141.110 cable
6.2141.110 cable
6.2125.120 adaptor
6.2143.200 cable 6.2143.210 cable
6.2125.090 cable