Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 89)

Configuring FactoryTalk Historian Chapter 6
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 89
To view the information on the allocated licenses:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools.
2. Under Collectives and Servers, select the server for which you
want to view the license information.
3. Under System Management Tools, select Operation >
Licensing.
4. Click Resources >
PointSourcesLimit..
NOTES
is the abbreviated name of the interface
type you added to the Point Sources tab when allocating points.
The node contains the following information:
Item name Description
Description The description of the license limit assigned to the interface
type (point source).
Total The total number of licenses allocated to the interface type.
It corresponds to the Limit value in the FactoryTalk
Administration Console.
Amount Used The number of points already configured for collecting data
from the interface type. It corresponds to the Point in Use
value in the FactoryTalk Administration Console.
Amount Left The number of licenses still available for the interface type.
Level The license enforcement level.
End Time The license expiration date.
Viewing Allocated Licenses