Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 81)

Configuring FactoryTalk Historian Chapter 6
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 81
The system takes into account the following license activations to
calculate the volume of the individual license pools:
• FHSE3ADD
• FHSE
• FHLD
• PTY3
If you want to calculate how licenses from your license activations
will be distributed between the license pools, follow the steps
described below.
To calculate the distribution of licenses between the General
and Rockwell license pools:
1. Calculate the value.
It is an intermediate value that will be used to calculate your
number of licenses of the General pool.
• If you use FHSE3ADD license activations, take the number
of your FHSE license activations and substitute it into the
following equation:
= 20% * ∑
See "Distributing Licenses with FHSE3ADD Activation
(page 82)" for details.
• If you do not use FHSE3ADD license activations, take the
number of your FHSE license activations and substitute it
into the following equation:
= Max (Min(1000, ∑ licenses>), 20% * ∑ )
See "Distributing Licenses without FHSE3ADD Activation
(page 83)" for details.