Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 30)

Chapter 4 Installing FactoryTalk Historian
30 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
8. Click OK. The system connects to the FactoryTalk
Directory server.
NOTE
On the computers that have FactoryTalk Services Platform
installed, you can open the Specify FactoryTalk
Directory Server Location Utility dialog box also from
Start > All Programs > Rockwell Software > FactoryTalk
Tools > Specify FactoryTalk Directory Location.
FactoryTalk Activation Manager allows you to download activation
files using an Internet connection, and transfer activation files to a
computer that does not have an Internet connection. Install this
software on the same computer as the FactoryTalk Directory server.
To install the FactoryTalk Activation Manager:
1. Run the FactoryTalk Historian SE installation DVD.
2. On the welcome page of the installation wizard, click
Install
FactoryTalk Historian Site Edition > Install FactoryTalk
Services Platform > Install FactoryTalk Activation.
The FactoryTalk Activation Manager installation wizard
appears with a list of prerequisite packages.
Click Continue.
3. In the message box that appears:
• Click Yes, if you want to install the software for Rockwell
Automation USB dongles.
The drivers are used to support mobile activations which
are locked in a hardware dongle.
Follow the on-screen instruction to install the software.
• Click No, if you want to skip this step.
4. On the Welcome... page, click Next.
Install FactoryTalk
Activation Manager