Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 42)

Chapter 4 Installing FactoryTalk Historian
42 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
11. In the message box that appears:
• Click Yes, if you want to install the software for Rockwell
Automation USB dongles.
The drivers are used to support mobile activations which
are locked in a hardware dongle.
Follow the on-screen instruction to install the software.
• Click No, if you want to skip this step.
The installation wizard appears.
12. Follow the instructions displayed on the screen to complete
the installation.
13. In the FactoryTalk Directory Server Location Utility dialog
box, identify the computer that hosts the FactoryTalk
Directory server. If it is the current computer, leave
localhost in
the text box. Otherwise, do the following to point to the
proper FactoryTalk Directory computer:
1. Click the ellipsis button ( ). The Login User dialog box
appears.
2. In the User name and Password text boxes, type the
credentials to the current FactoryTalk Directory machine.
The FactoryTalk Directory Server Configuration dialog
box appears.
3. Select the Remote computer option and click the ellipsis
button ( ) to open the Browse for Computer dialog box.
4. Select the machine that hosts the FactoryTalk Directory
and click OK.
The name of the machine appears in the FactoryTalk
Directory Server Location Utility dialog box.
5. Click OK.
6. In the message box informing you that you will need to
restart the computer, click OK.